אשמח אם מישהו יוכל אפילו להפנות אותי לאתר שיש אפשרות להשיג את הקוד למסך שארפ LC37SA1
תודה
מחפש קוד לבדיקת שעות למסך LC37SA1
- Shayosef
-
- חבר מכור קשה
- תגובות: 5891
- הצטרף: אפריל 2007
- מיקום: תל אביב
- נתן תודות: 443 פעמים
- קיבל תודות: 242 פעמים
נסה את זה:
[left]Disclaimer: Don't do this unless you are willing to take the risk of turning your expensive TV into an expensive doorstop. Any damage caused is almost certainly not covered by warranty, and I have no idea what is in the service menu.
Found in a technical service bulletin CTV00032.pdf for the LC32G4U at
www.sharp.ca\downloads\:
- power down with the MAIN POWER button
- disconnect the system cable from the LCD display
- on the display, press and hold VOLUME DOWN and INPUT, then press the MAIN POWER button
- after K is displayed on the screen, press CHANNEL DOWN and VOLUME UP
- navigate with the remote control
Don't change anything!
A software upgrade to v2.05 is recommended if the current version is v2.02 or lower, but there is no description of what issues are covered by the upgrade. The upgrade should be performed by a qualified service technician.[/left]
[left]Disclaimer: Don't do this unless you are willing to take the risk of turning your expensive TV into an expensive doorstop. Any damage caused is almost certainly not covered by warranty, and I have no idea what is in the service menu.
Found in a technical service bulletin CTV00032.pdf for the LC32G4U at
www.sharp.ca\downloads\:
- power down with the MAIN POWER button
- disconnect the system cable from the LCD display
- on the display, press and hold VOLUME DOWN and INPUT, then press the MAIN POWER button
- after K is displayed on the screen, press CHANNEL DOWN and VOLUME UP
- navigate with the remote control
Don't change anything!
A software upgrade to v2.05 is recommended if the current version is v2.02 or lower, but there is no description of what issues are covered by the upgrade. The upgrade should be performed by a qualified service technician.[/left]
שי
