I finally finish my HTPC
Antec NSK 2400 (380 PSU fan swap to Nexus 80mm Fan SP802512L-03
Gigabyte Motherboard GA-MA69GM-S2H
AMD Athlon Dual-Core +4400 (65w / 65nm)
Corsair XMS2 2GB 2x1GB 800Mhz
Seagate SATA 250GB "2.5
WD SATA 60GB "2.5
Scythe Mini Ninja CPU Heatsink Fanless
Zalman ZM-NBF47 Fanless Northbridge Cooler
2 X Scythe S-Flex 1200 RPM
Zalman ZM-MFC2 (Fix the view angle problem)
Hauppauge WinTV-PVR-150 MCE
Lite-ON SATA DVD RW X 20 LH-20A1S
Here is some number:
CPU:
29c - 32c with Cool & Quiet - Fans set to 600rpm
Scythe Mini Ninja CPU Heatsink Fanless
PSU (after fan swap - Nexus 80mm Fan SP802512L-03) in idle mode:
Fan set to 1000 rpm
Exhaust temp 29c – 30c
Heatsink 35c – 37c
The fan swap take me no more than 15 mints
Northbridge (after heatsink change - Zalman ZM-NBF47)
Heatsink temp is 42c – 44c (66c – 68c with the original heatsink)
The 2 HDD was suspended vertical,
With elastic clothes-type material, it is not the nicest suspnded,
But the result was fantastic!!!
I will late the picture talk………
PSU fan swap :

The PSU is out of the case...

The PSU is out of the case...

The fan is out...

The original fan...

The fan connector...

The new Nexus fan is in...

The new Nexus fan is in...

The new Nexus fan is in...

The exhaust temp sensor...
[

The mobo layout...

The back of the case...

Fixing the view angle problem of the zalman screen...

Fixing the view angle problem of the zalman screen...

Fixing the view angle problem of the zalman screen...

The final result...

The final result at night...
Enjoy
מקווה שלא תכעסו כי העלתי את הנושא באנגלית, הנושא הזה נכתב ע"י במקור לפורם באתר
www.silentpcreview.com וראיתי לנכון להעלות אותו בפורמט המקורי.
לילה טוב,
אודי




