Pioneer Elite PRO 506PU from USA. What now?

[mafufo]

I have brought from the US a Pioneer Elite PRO 506PU.
This set is NTSC only and 110V, I have a converter from 220 to 110, I also have a decoder to change the signal from PAL to NTSC, but the image comes out really bad. Is there something I can do

[ronko]

[left] What are you trying to connect to the TV?
If you want to hook up your YES or HOT receiver, or any other device with SCART output, you can get a SCART to COMPONENT converter. Just google it and you will find several of them. eBay has them for as little as $60. They work with both pal and ntsc devices. This will give you the best results.

For other composite or S-video devices, I am assuming you are using a cheap analog PAL to NTSC converter. If you are, they don’t really cut it if you are looking for quality. You can try the more expansive digital PAL to NTSC converter. They cost around $200 but they do a better job.

For off the air channels, you can hook up a pal VCR to the converter and use its tuner to pick up the channels.

Another option that may or may not be practical for you is to get a good tuner/capture card for your computer and connect whatever you need to it and hook up the computer to the tv thru the DVI or HDMI port. Check the HTPC section for more info about that.

Good luck [/left]

[oferlaor]

חברה, אנחנו בארץ הקודש, מה קורה פה?

למי שאין מקלדת בעברית, אם תלחצו על פרסם תגובה, בצד שמאל למטה יש לינק למקלדת וירטואלית בעברית.

[benny_1234]

איך אני מסנכרן ת'כתוביות????????????????????????????????????????

[ronko]

[left] My Hebrew sucks. It would take me all day to type that much in Hebrew. [/left]

[amitgba]

אז...איך הצלחת לעבור את האתר הראשי המחמיר שלנו ובדרך בלתי אפשרית להגיע לפורום הזה? ועוד שלא נדבר על להירשם

[ronko]

זה לא היה קל, זה בטוח.
לא כבתי עברית מעז שהיתי ילד, מעל 23 שנה. אני מתפלא שאני זוכר כלכך הרבה.