אינטרנט לא חוזר אחרי הפסקת חשמל-ראוטר Asus BT10 ומתאם של פרטנר (GF10SK)

פורום רשתות, IT ומחשוב כללי - רשתות, ראוטרים, מחשבים ניידים, אביזרים וכו'.
avinin1 פותח השרשור
סמל אישי של משתמש
חבר פעיל מאוד
חבר פעיל מאוד
תגובות: 242
הצטרף: נובמבר 2010
מיקום: de_dust2 / King's row
סקייפ: avinin1

שליחה

היי לכולם, רציתי להתייעץ כאן בבעיה עם צמוד ה-ASUS BT10 תקופה, בתקווה שמכאן יגיע המענה ממישהו עד נסיון דומה.

יש לי חיבור סיבים של פרטנר (רוכב על בזק) 5Gbps/500Mbps, עם ממיר סיב GoFiber GF10SK וצמד MESH ראוטרים ASUS ZenWiFi BT10 שבסך הכל עובדים פצצה. חיבור ה־WAN מוגדר כ־PPPoE. גר באיזור עם הפסקות חשמל לפחות מספר פעמים בחודש (תמא, עבודות רכבת קלה ושאר ירקות) וכשיש הפסקת חשמל והראוטר וממיר הסיב נדלקים יחד, האינטרנט לא חוזר לבדו. בחיווי של האפליקציה של ASUS מופיעה הודעה שכבל הרשת מנותק, למרות שפיזית מחובר.
מה שעובד אצלי באופן עקבי הוא לנתק את שניהם מהחשמל, להדליק קודם את ה־GF10SK, לחכות שהנורות יתייצבו ורק אז להדליק את ה־BT10 הראשי שמחובר ל-ONT. ואחרי זה האינטרנט חוזר. עם צמד ה- ASUS XD6 שהיה לי קודם, אותו ממיר ואותם כבלים, הכל היה חוזר לעבוד אוטומטית אחרי הפסקת חשמל.

ניסיתי להפעיל מחדש את הראוטר דרך האפליקציה, להעביר את ה־WAN מפורט 10GbE לפורט 1GbE (במחשבה שאולי קיימת בעיה עם הפורט), ולכבות ולהפעיל את חיבור האינטרנט דרך הממשק - ללא הועיל.התקלה הופיעה גם עם Dual WAN כבוי ו־DNS Probe שהוגדר לחמישה+ ניסיונות כושלים (בקשות של התמיכה של אסוס). גרסת הקושחה מעודכנת.

בתמיכה של ASUS העלו אפשרות שה־BT10 מסיים לעלות לפני ממיר הסיב ואז נתקע בניסיון לשחזר את החיבור, אך לא הוציעו פתרון ממשי מצידם ואף הגדילו להציע שאקנה UPS להימנע מזה מלחתחילה.

מישהו נתקל בהתנהגות כזאת עם BT10?, או עם מוצרי אסוס בכלל?
תגובת ASUS ישראל
ASUS Support <[email protected]‏>

Hello,

At this time, we recommend ensuring that your ZenWiFi BT10 is running the latest firmware available. If a newer firmware version is available, please update the device and test the behavior again.

Additionally, please verify that the WAN port is configured to Auto Negotiation and that no Dual WAN settings are enabled unless they are intentionally being used.

If the issue persists after confirming the latest firmware and default WAN configuration, please provide the following information so we can investigate further:

The current firmware version installed on the ZenWiFi BT10.
Whether the issue occurs after every power outage or only intermittently.
The system log (System Log) collected immediately after the issue occurs, before rebooting the router.
Once we receive this information, we will be happy to continue investigating the issue.

Thank you for your cooperation.
...
Thank you for the additional information.

We understand that the issue occurs consistently after every power outage, and that the same ONT and ISP connection worked correctly with your previous ASUS ZenWiFi XD6 system.

We also note that:

The firmware version installed is 3.0.0.6.102_39112 on both the main router and the AiMesh node.
Dual WAN is disabled.
The router reports "Ethernet cable unplugged" after power is restored, even though the cable is physically connected.
The connection is restored only after powering on the ONT first, waiting for it to fully initialize, and then powering on the BT10.
At this time, we do not have any additional configuration changes to recommend beyond those already provided.

As a temporary workaround, we recommend continuing to power on the ONT first and allowing it to fully initialize before powering on the BT10 after a complete power outage.

If a future firmware update addressing this behavior becomes available, it will be published on the ASUS support website for your device.

Thank you for your understanding.

שמח לתת שירות

כמו כן,

אנו זמינים לכל שאלה בערוצי התקשורת הבאים :

טלפון - 03-3741339 בימי א' עד ה' בין השעות 8:00-16:00

Email-ימי א' עד ה' בין השעות 8:00-16:00

Chat - ימי א' עד ה' בין השעות 8:00-16:00

בברכה,





Daniel

Call Center Agent

ASUSTeK Computer Inc. |Customer Service Center |ASUS Israel
...
תודה מראש!

חזור אל “רשתות, אינטרנט ו- Fiber”