נא להציג נתוני SMART כדי להוכיח את גיל הכונן, מה שקובע זה לא תאריך הקנייה, אלא כמה זמן הכונן עובד.
אצלי יש כונן של WD סדרה ירוקה, מאוד ישן, העומד על 39,167 שעות עבודה. והיד עוד נטויה...
(מי אמר שהירוקה לא מתאימה לשרתים...?)
קוד: בחירת הכל
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-36-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF)
Device Model: WDC WD15EARS-00Z5B1
Serial Number: WD-WMAVU1758171
LU WWN Device Id: 5 0014ee 0574c216f
Firmware Version: 80.00A80
User Capacity: 1,500,300,828,160 bytes [1.50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Sep 28 22:16:53 2014 IDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (31200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 356) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 182 178 021 Pre-fail Always - 5900
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 575
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 047 047 000 Old_age Always - 39167
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 165
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 99
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1474703
194 Temperature_Celsius 0x0022 114 093 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 27001 -
# 2 Short offline Completed without error 00% 11264 -
# 3 Short offline Completed without error 00% 11264 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
31,376. זה שמובא כאן למטה, ממש על סף מוות, השני בשבועיים האחרונים, בעוד הקודם חי מחצית מחייו של זה.
התאום שלו, שעלה איתו לשרת, חי ובועט ועושה סימנים שימשיך עוד הרבה.
קוד: בחירת הכל
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-36-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.C
Device Model: Hitachi HDS721010CLA332
Serial Number: JP6930HD0VE8DF
LU WWN Device Id: 5 000cca 373cc0377
Firmware Version: JP4OA3EA
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Sep 28 22:21:24 2014 IDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9929) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 95
3 Spin_Up_Time 0x0007 125 125 024 Pre-fail Always - 321 (Average 287)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 207
5 Reallocated_Sector_Ct 0x0033 089 089 005 Pre-fail Always - 373
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 138 138 020 Pre-fail Offline - 31
9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 31376
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 121
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 286
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 286
194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 21/49)
196 Reallocated_Event_Count 0x0032 087 087 000 Old_age Always - 408
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 149 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 149 occurred at disk power-on lifetime: 31149 hours (1297 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 c7 f9 3b da 00 Error: UNC 199 sectors at LBA = 0x00da3bf9 = 14302201
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 f8 c8 3b da e0 08 17d+19:35:35.950 READ DMA EXT
25 00 f8 d0 37 da e0 08 17d+19:35:21.847 READ DMA EXT
c8 00 10 c0 37 da e0 08 17d+19:35:21.846 READ DMA
25 00 f8 c8 33 da e0 08 17d+19:35:21.060 READ DMA EXT
25 00 f8 d0 2f da e0 08 17d+19:35:17.218 READ DMA EXT
Error 148 occurred at disk power-on lifetime: 31149 hours (1297 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0d 0b 10 d9 00 Error: UNC 13 sectors at LBA = 0x00d9100b = 14225419
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 08 10 d9 e0 08 17d+19:29:30.994 READ DMA
25 00 f8 28 10 d9 e0 08 17d+19:29:29.175 READ DMA EXT
c8 00 10 18 10 d9 e0 08 17d+19:29:27.531 READ DMA
27 00 00 00 00 00 e0 08 17d+19:29:27.529 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 17d+19:29:27.479 IDENTIFY DEVICE
Error 147 occurred at disk power-on lifetime: 31149 hours (1297 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0d 0b 10 d9 00 Error: UNC 13 sectors at LBA = 0x00d9100b = 14225419
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 f8 20 0c d9 e0 08 17d+19:28:52.179 READ DMA EXT
25 00 f8 28 08 d9 e0 08 17d+19:28:51.448 READ DMA EXT
c8 00 10 18 08 d9 e0 08 17d+19:28:51.433 READ DMA
25 00 f8 20 04 d9 e0 08 17d+19:28:51.376 READ DMA EXT
25 00 f8 28 00 d9 e0 08 17d+19:28:51.322 READ DMA EXT
Error 146 occurred at disk power-on lifetime: 31016 hours (1292 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0c f4 13 d9 00 Error: UNC 12 sectors at LBA = 0x00d913f4 = 14226420
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 f0 13 d9 e0 08 33d+16:25:29.136 READ DMA
27 00 00 00 00 00 e0 08 33d+16:25:29.133 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 33d+16:25:29.083 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 33d+16:25:29.037 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 33d+16:25:29.035 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 145 occurred at disk power-on lifetime: 31016 hours (1292 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 ca 26 10 d9 00 Error: UNC 202 sectors at LBA = 0x00d91026 = 14225446
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 f8 f8 0f d9 e0 08 33d+16:24:26.221 READ DMA EXT
27 00 00 00 00 00 e0 08 33d+16:24:26.218 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 33d+16:24:26.168 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 33d+16:24:26.122 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 33d+16:24:26.120 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1965 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
