גם מרנץ מצטרפת לחגיגת ה-Dolby Atmos עם השקת הרסיבר SR7009 והפרוססור AV7702

[epony]

[left]

Marantz Unveils New AV Receiver and Preamp/Processor for Dolby Atmos Sound

The newest line of Marantz AVR’s which are expected to be available in September have been developed to deliver captivating, multi-dimensional sound with Dolby Atmos. The SR7009 and the AV7702 (October) models will be the first Marantz products to feature Dolby Atmos.

With Dolby Atmos, sound comes alive from all directions, including overhead, to fill the home theater with astonishing clarity, power, detail, and depth.

All Dolby Atmos compatible Marantz products will have the processing power to run a more enveloping, Audyssey MultEQ XT32 calibrated 9 channel Dolby Atmos layout using 5.1.4 or 7.1.2 configurations utilizing ceiling mounted, or Dolby Atmos-enabled speakers. A 5.1.4 speaker configuration is based upon a traditional 5.1 speaker layout complemented by 4 overhead, or Dolby Atmos-enabled speakers. A 7.1.2 configuration is based on a 7.1 speaker layout with 2 overhead, or Dolby Atmos-enabled speakers.

...

[/left]

מקור: http://www.marantz.co.uk/uk/news/pages/ ... newsid=124

[mbd]

ידוע.


[הודעה #30] #30 נשלח: ה' 26/06/2014 3:28
גם MARANTZ הכריזו על מכשירים חדשים. מצורפת כאן השוואה של הנתונים העיקריים בין הדגמים השונים נכון להיום.

--> Denon AVR-X4100: 13 speaker pre-outs (plus 2 subwoofer outputs), 11 sets of binding posts, 7 internal amps, and it appears as though you can run a maximum of 9 speakers simultaneously.

--> Denon AVR-X5200: 13 speaker pre-outs, 11 sets of binding posts, 9 internal amps, and appears you can run a maximum of 11 speakers simultaneously.

--> Denon AVR-X7200: 13 speaker pre-outs, 11 sets of binding posts, 9 internal amps, and appears to run a maximum of 11 speakers simultaneously.

Differences between the X5200 and X7200? Looks as though the X7200 gives you 7.1 analogue audio inputs, a 2nd component video output, 32-bit DACs, and beefier internal amps.

But that AVR-X4100 is nuts! 13 pre-outs but only 7 internal amps and 9 simultaneous speakers? So...5.1 plus 4 Height speakers for Dolby Atmos?

Over at Marantz...

--> Marantz SR7009: 13 speaker pre-outs, 11 sets of binding posts, 9 internal amps, and appears to run a maximum of 11 speakers simultaneously.

The SR7009 appears to actually be closest to the Denon X5200, but it adds 7.1 analogue audio inputs. Otherwise, it's closer to the X5200 than the X7200.

--> Marantz AV7702: 13 RCA pre-outs, 11 XLR outputs, appears to run a maximum of 11 speakers simultaneously

So this looks to be an SR7009 in Pre/Pro form. Exact same compliment of inputs, same 24-bit DACs, but with 11 XLR outputs instead of speaker binding posts and 9 internal amps.

Finally...

--> Marantz AV8802: 13 RCA pre-outs, 13 XLR outputs, might this actually be able to run 13 speakers simultaneously?

[epony]