מנהלים לנעוץ - קובץ CONFIG מוכן עם OC ל-RPI
ביום שבת שדרגתי את הגרסה ב- RPI שלי של OE ל-4.0.3
השתמשתי בקובץ CONFIG מהגרסה הקודמת שעשיתי לו OC ועד עכשיו הכול מתפקד יפה מאוד.
לטובת כל מי שהתעניין בנושא ה-OC ושאל כיצד לבצע והאם כדאי, החלטתי להעלות לכאן את הקובץ שלי עם ה-OC שעובד מצויין.
כמובן שאיני אחראי למכשיר שלכם וכל מי שמשתמש בקובץ עושה זאת על אחריותו בלבד.
תבלו
https://dl.dropboxusercontent.com/u/10530934/RPI%20OE%20config%20OC.rar
השתמשתי בקובץ CONFIG מהגרסה הקודמת שעשיתי לו OC ועד עכשיו הכול מתפקד יפה מאוד.
לטובת כל מי שהתעניין בנושא ה-OC ושאל כיצד לבצע והאם כדאי, החלטתי להעלות לכאן את הקובץ שלי עם ה-OC שעובד מצויין.
כמובן שאיני אחראי למכשיר שלכם וכל מי שמשתמש בקובץ עושה זאת על אחריותו בלבד.
תבלו
https://dl.dropboxusercontent.com/u/10530934/RPI%20OE%20config%20OC.rar
אתה בטוח שאתה רוצה לעשות את זה:
http://wiki.gentoo.org/wiki/Raspberry_P ... rbo_Option
[left]
Force Turbo Option
The force turbo option turns off the dynamic clocks and runs the Raspberry Pi constantly at the highest arm_freq. [2] Edit the /boot/config.txt, add force_turbo=1 then reboot the Raspberry Pi for changes to take effect.
[/left]
זה לא נראה לי טוב בכללללל
קוד: בחירת הכל
# set to 'force_turbo=1' to disable dynamic overclocking (you can lose your warranty!)
force_turbo=1
[left]
Force Turbo Option
The force turbo option turns off the dynamic clocks and runs the Raspberry Pi constantly at the highest arm_freq. [2] Edit the /boot/config.txt, add force_turbo=1 then reboot the Raspberry Pi for changes to take effect.
[/left]
זה לא נראה לי טוב בכללללל
אצלי עובד מעולה.alon24 כתב:אתה בטוח שאתה רוצה לעשות את זה:
# set to 'force_turbo=1' to disable dynamic overclocking (you can lose your warranty!)
force_turbo=1
http://wiki.gentoo.org/wiki/Raspberry_P ... rbo_Option
[left]
Force Turbo Option
The force turbo option turns off the dynamic clocks and runs the Raspberry Pi constantly at the highest arm_freq. [2] Edit the /boot/config.txt, add force_turbo=1 then reboot the Raspberry Pi for changes to take effect.
[/left]
זה לא נראה לי טוב בכללללל...
היתרון הוא שניתן לשנות את הערך ולעבוד במצב רגיל. זה פשוט חוסך כאב ראש למי שלא יודע ומעוניין לבצע את התהליך.
אם יישרף לי המכשיר אעדכן.


