MARK LEVINSON ML-3
The Mark Levinson ML-3 was a 200 watt per channel dual monaural Class AB2 power amplifier that used toroidal transformers. Produced between 1979 and 1987, the ML-3 consisted of two electrically separate amplifiers in one chassis, hence the name "Dual Monaural". It also featured discrete circuit construction, no integrated circuits were incorporated in order to keep the signal pure. The design was by Thomas P. Colangelo.
The ML-3 constituted the archetype of an American highend, highpower amplifier.
Specifications[edit]
200 W/channel at 8 ohms, 400 W/ch at 4 ohms, 800 W/ch at 2 ohms
Maximum output: 45 volts 30 amperes
Two 1.2 kVA Avel Lindbergh torodial transformers, 4 Sprague 36,000 µF, 100 V capacitors and 40 output devices (20 per channel)
Range: 20 Hz to 20 kHz with less than 0.2% total harmonic distortion
Gold-plated CAMAC input connectors
Adjustable AC voltage: No, factory set
Adjustable output damping toggle switches (one per channel) (in later models only)
Weight: 116 lb (56 kg)8O
המגבר שאצלי
שמור ביותר
המגבר עבר רענון קבלים וניקיון כללי אצל אחד הטכנאים הטובים בארצנו (טיפול לשנת 2010).
הושקעו שם כמה אלפים.
החלפת מחברים ל-WBT.
ועוד...
נשמע נהדר
לא כל יום רואים כאן כאלו מפלצות.לאיזה PRE הוא ישודך?
