לפי האתר זמינות מהחצי השני של 2011 ...
אחד הדברים המעניינים שיכולים להיות ...
[left]It is impossible to compare Hilo to other two channel AD and DA converters. In fact it is a unique product that is, at first, a little difficult to get your head around. Basically, Hilo replaces three different, critical components:
#1 Hilo is an analog to digital converter
#2 It is also a digital to analog converter. With most companies, these are two separate units.
#3 It is an independent headphone amplifier. The headphone section has its own, dedicated D/A converter. This provides two key benefits. First this allows Hilo to offer a headphone output with exceptional clarity and noise specifications. Second, due to Hilo’s internal 32 channel mixer, any input set can be routed to the headphone stereo output. This means that a mix that is entirely different from the analog outputs and monitors can be applied to the headphones.[/left]...
[left]
* Hilo is a 3 in one unit – AD converter, DA converter and Headphone with its own dedicated D/A converter.
* There are three sets of analog outputs: main analog output, monitor output (with volume) and headphone output (with volume)
* The flexible digital I/O section offers the choice of AES/EBU, SPDIF by coax or TOSLINK optical, or ADAT formats
* The innovative design of the analog stage and converter topology allow ultra low noise and distortion specifications
* A 480 x 272 pixel LCD touch screen for operation and monitoring
* A 32 channel internal mixer in the updatable FPGA
* 12 total inputs, 16 total outputs plus 32 channels possible via LSlot.
* AC powered with Battery operation available
* Open ended software for future measurement, metering, diagnostic and personalization features using the touch screen LCD.[/left]
[left]
Actual measurements of a preproduction model show:
LINE IN PERFORMANCE THD+N -114dB @1kHz, -1dBFS, 20kHz filter Dynamic Range 121 dB, A-weighted, -60dBFS signal method Frequency Resp. ± 0.01 dB, 20 – 20kHz Crosstalk 130 dB maximum @ 1kHz, -1dBFS signal
LINE OUT PERFORMANCE THD+N -109dB @1kHz, -1dBFS, 20kHz filter Dynamic Range 121 dB, A- weighted, -60dBFS signal method Frequency Resp. ± 0.01 dB, 20 – 20kHz Crosstalk -120 dB maximum @ 1kHz, -1dBFS signal[/left]
