העכבר FragNstein מתחיל להיתקע אחרי פרק זמן מסויים שאני משחק איתו ואז צריך לכבות אותו ואת ה USB שבפלסטשיין ולהפעיל הכל מחדש
זה מציק
אני לא חושב שזה היה בתדירות כזאת לפני שעדכנתי את הקשוחה של העכבר לקשוחה שתואמת את העדכון 3.5 של ה PS3
מה עושים?
אני משתמש בפד עכבר שאני הכנתי בעצמי והתוכנה מראה שהקליטה של העינית עליו היא בין 85% ל 92% קבוע
לקחתי קרטון לבן ועתפתי אותו בנילוניות(ראיתי שתמיד דרך נילוניות העכבר מראה אחוזים הרבה יותר גבוההים ולכן החלטתי לעשות ככה את המשטח)
זה לא בגלל המשטח
אין מצב.. יש על המשטח הזה דיוק טוב
מה לעשות?
העכבר FragNstein נתקע לפעמים אחרי כמה זמן שאני משחק איתו
- ViruzZ
-
- חבר פעיל במיוחד
- תגובות: 790
- הצטרף: יולי 2010
- מיקום: נתניה
- נתן תודות: 35 פעמים
- קיבל תודות: 25 פעמים
http://bannco.com/index.php?option=com_ ... &Itemid=63
[left]Controller stops at times:
On the PS3 sometimes your controller may stop and then start up again after a 1 to 2 second delay. We call this stuttering.
If the problem persists it means that you are in a high radio frequency area. This RF frequency is everywhere and depending on your location the source can be cordless phones, surround sound systems, cell phones, computers, headphones and earphones, other game devices and routers. The biggest culprit is a bluetooth wireless device as they can and do stray outside their designated bandwidth.
The FRAGnStein uses frequency hopping, which means that it will seek an open bandwidth to transmit and receive[/left].
[left]Stutter Solutions:
In the firmware program there is a section called ADJUST RF. This section has 4 other a1ternative bandwidths that can be used to try to secure a free channel. This is only recommended for users that do experience RF pollution.
In some cases even that will not solve the stuttering. To address this it is recommended that you try to isolate the interfering device such as turning your router off, keeping cell phones out of the game area, turning off all other controllers, changing the channel on your cordless phone.
In even more extreme cases the interference comes from a neighbors device.
If you have tried these suggestions and still have stutter please let us know as we do have a special high RF firmware that we can send you direct[/left].
[left]Controller stops at times:
On the PS3 sometimes your controller may stop and then start up again after a 1 to 2 second delay. We call this stuttering.
If the problem persists it means that you are in a high radio frequency area. This RF frequency is everywhere and depending on your location the source can be cordless phones, surround sound systems, cell phones, computers, headphones and earphones, other game devices and routers. The biggest culprit is a bluetooth wireless device as they can and do stray outside their designated bandwidth.
The FRAGnStein uses frequency hopping, which means that it will seek an open bandwidth to transmit and receive[/left].
[left]Stutter Solutions:
In the firmware program there is a section called ADJUST RF. This section has 4 other a1ternative bandwidths that can be used to try to secure a free channel. This is only recommended for users that do experience RF pollution.
In some cases even that will not solve the stuttering. To address this it is recommended that you try to isolate the interfering device such as turning your router off, keeping cell phones out of the game area, turning off all other controllers, changing the channel on your cordless phone.
In even more extreme cases the interference comes from a neighbors device.
If you have tried these suggestions and still have stutter please let us know as we do have a special high RF firmware that we can send you direct[/left].
