ראיתי שיש כפתור TV על השלט ואני רוצה ללמד אותו לפתוח ולשלוט בטלוויזיה שלי, אפשר ללמד אותו?
יש מצב למכשירים נוספים (כגון להדליק את הRECIEVER)?
ללמד את השלט של MCE
יכולת הלימוד של שלט מיקרוסופט נראית מוגבלת למספר כפתורים בלבד. הנה מה שנכתב על הנושא ב-avsforum:
Q. How do you program the Windows MCE remote to control other equipment. like your TV or amplifier?
A. To program buttons on the remote control using the learning feature
1. Place the remote control for Media Center PC head to head (2 to 3 inches apart) with the remote from which it is learning.
2. On the remote control for Media Center PC, press and hold the DVD MENU and OK buttons at the same time until the remote control lights turn off (2 seconds).
3. On the remote control for Media Center PC, press and release the TV, VOL+, or VOL- button, depending on which command you want it to learn.
4. On the remote control that is teaching the command, press and hold the button that you want the corresponding button on the remote control for Media Center PC to learn.
The remote control for Media Center PC lights blink twice to confirm the selection.
If the remote did not learn the command, the lights blink quickly four times. To try again, repeat steps 1 through 4.
To restore the default remote control settings:
1. Press and hold the DVD MENU button and the LEFT navigation button at the same time until the remote control for Media Center PC lights turn off.
2. Press the OK button.
The remote control for Media Center PC lights blink twice to confirm that the buttons have been reset. The TV button will have no command assigned to it and the VOL+ and VOL- buttons will adjust the Media Center PC volume.
הצעתי: תרכוז שלט לוומד אמיתי ותלמד אותו את השלט של מיקרוסופט ולא להיפך כך שתשאר עם שלט אחד שאותו ניתן ללמד לשלוט על כל מה שרוצים.
Q. How do you program the Windows MCE remote to control other equipment. like your TV or amplifier?
A. To program buttons on the remote control using the learning feature
1. Place the remote control for Media Center PC head to head (2 to 3 inches apart) with the remote from which it is learning.
2. On the remote control for Media Center PC, press and hold the DVD MENU and OK buttons at the same time until the remote control lights turn off (2 seconds).
3. On the remote control for Media Center PC, press and release the TV, VOL+, or VOL- button, depending on which command you want it to learn.
4. On the remote control that is teaching the command, press and hold the button that you want the corresponding button on the remote control for Media Center PC to learn.
The remote control for Media Center PC lights blink twice to confirm the selection.
If the remote did not learn the command, the lights blink quickly four times. To try again, repeat steps 1 through 4.
To restore the default remote control settings:
1. Press and hold the DVD MENU button and the LEFT navigation button at the same time until the remote control for Media Center PC lights turn off.
2. Press the OK button.
The remote control for Media Center PC lights blink twice to confirm that the buttons have been reset. The TV button will have no command assigned to it and the VOL+ and VOL- buttons will adjust the Media Center PC volume.
הצעתי: תרכוז שלט לוומד אמיתי ותלמד אותו את השלט של מיקרוסופט ולא להיפך כך שתשאר עם שלט אחד שאותו ניתן ללמד לשלוט על כל מה שרוצים.
