סיב בזק במהירות 2.5G עם ציוד פרטי
- Cyber_Ghost
- חבר שרק התחיל

- תגובות: 6
- הצטרף: דצמבר 2022
- שם מלא: Peleg Wasserman
- נתן תודות: 0
- קיבל תודות: 0
אם אתה רוצה לחבר ישירות למחשב, אתה צריך כרטיס שתומך ב-SPF+ במהירות לא סטנדרטית - אין הרבה כאלה - כנראה שתצטרך לחפש טוב וזה יהיה יקר. לקח לי זמן להבין שזו הייתה הבעיה שלי ובגללה קיבלתי מהירות נמוכה.
https://www.reddit.com/r/PFSENSE/commen ... g_options/ - יש פה דיון בנושא.
הפתרון שלך יכול להיות או ממיר מסיב לכבל שתומך במהירות של 10גיגה ואז SPF במחשב או ממיר לכבל 2.5 גיגה וכרטיס 2.5 למחשב (בהצלחה למצוא משהו טוב בארץ, תצטרך כנראה להזמן מחו"ל). אצלי במקום ממיר חיברתי סוויץ' מיקרוטיק ספייר שהיה לי במצב ברידג' וזה עובד.
https://www.reddit.com/r/PFSENSE/commen ... g_options/ - יש פה דיון בנושא.
הפתרון שלך יכול להיות או ממיר מסיב לכבל שתומך במהירות של 10גיגה ואז SPF במחשב או ממיר לכבל 2.5 גיגה וכרטיס 2.5 למחשב (בהצלחה למצוא משהו טוב בארץ, תצטרך כנראה להזמן מחו"ל). אצלי במקום ממיר חיברתי סוויץ' מיקרוטיק ספייר שהיה לי במצב ברידג' וזה עובד.
ככל הידוע לי, זה מאפשר חיבור רק דרך בזק או דרך גילת טלקום. המדיניות הרשמית של חברות אחרות , ובכללן סלקום, היא שהן לא מאפשרות חיבור דרכן לרשתות GPON עם ציוד שהוא לגמרי פרטי. הן מתעקשות שהחיבור יהיה דרך ציוד שהן מספקות (בהשאלה או השכרה}. למי שרוצה להתחבר עם נתב פרטי, מספקים מתאם (Bridge ONT)....
המתאם הזה לא רלוונטי (לפחות בשלב זה) לתשתית בזק.23/02/2024 23:37OMRIJ כתב: אתה יכול לקבל מסלקום מתאם כזה
https://dzsi.com/product/5302
ולחבר אותו לכרטיס רשת 2.5/10 במחשב...
רק מעיר שאצלי סלקום חיברו ONT G-010G-T לחיבור 2.5G מול סיב בזק...
אגב, אישית הזמנתי בינתיים את המתאם הזה (ZTE-F601 ת גם מהרשימה של בזק) כדי לעבור לגילת אחרי לחיבור במהירות 1G, שמספיקה לי (שכעת בדרך אלי...):
https://www.aliexpress.com/item/1005006062988523.html
נערך לאחרונה על ידי rafi_d ב 24/02/2024 10:58, נערך 4 פעמים בסך הכל.
סביר להניח שמה שהם חיברו זה G-010G-T (שזה לא מודול SFP, אלא Bridge ONT שתומך ב-2.5G ומופיע ברשימת הציוד המאושר של בזק) ולא כפי שכתבת....
צודק, טעות שלי... אתקן בPOST...24/02/2024 10:40itfan כתב: סביר להניח שמה שהם חיברו זה G-010G-T (שזה לא מודול SFP, אלא Bridge ONT שתומך ב-2.5G ומופיע ברשימת הציוד המאושר של בזק) ולא כפי שכתבת....
אגב, מצאתי כאן אתר חביב עם נתוני רוב המתאמים... :
https://hack-gpon.org/
https://hack-gpon.org/ont-nokia-g-010g-t/
- adamericson
- חבר שרק התחיל

- תגובות: 25
- הצטרף: ספטמבר 2014
- נתן תודות: 0
- קיבל תודות: 1 פעם
אוקיי,
תודה רבה לכולם
אם אני מבין נכון עדיף לי לוותר על לחבר הכל ישר לראוטר וכן אצטרך מתאם מדיה בשביל הסיפור.
שוב תודה.
תודה רבה לכולם
אם אני מבין נכון עדיף לי לוותר על לחבר הכל ישר לראוטר וכן אצטרך מתאם מדיה בשביל הסיפור.
שוב תודה.
לא קשור ל"עדיף", אתה צריך חיבור אופטי OTN. אם תקנה נתב שיש בו חיבור אופטי + פורט אחד לפחות של 2.5G כולל מודם OTN - גם סבבה...
- adamericson
- חבר שרק התחיל

- תגובות: 25
- הצטרף: ספטמבר 2014
- נתן תודות: 0
- קיבל תודות: 1 פעם
אז משהו מונע ממני להוסיף חיבור אופטי OTN למחשב?
שאלה יותר טובה.
מה אתה ממליץ שאקנה?
תודה רבה
שאלה יותר טובה.
מה אתה ממליץ שאקנה?
תודה רבה
למחשב? לא מכיר, לא יודע. ל1g שיתפתי לינק למתאם ב12$~... ל2.5g ראית את הדגם הנכון...
משתתף בצערך... ואם תשאיר את שאר הפרטים חסויים (ספקית סיב, דגם), המצב גם לא ישתנה....
אצלי כן עובד...
- Barr72159
- חבר שרק התחיל

- תגובות: 2
- הצטרף: פברואר 2024
- שם מלא: בר ישראל כהן
- מיקום: בית שמש
- נתן תודות: 0
- קיבל תודות: 0
הספק שלי זה בזק והיום שדרגתי ל2.5GB
וקבלתי מבזק sfp
G-010S-A
קניתי ממיר אופטי חדש של 2.5
אבל זה עדיין לא עובד לי
אבל ברגע שאני מחבר את הממיר אופטי הישן של 1G זה כן עובד לי אבל הבעיה שהוא לא תומך ב2.5 לכן קניתי חדש
וקבלתי מבזק sfp
G-010S-A
קניתי ממיר אופטי חדש של 2.5
אבל זה עדיין לא עובד לי
אבל ברגע שאני מחבר את הממיר אופטי הישן של 1G זה כן עובד לי אבל הבעיה שהוא לא תומך ב2.5 לכן קניתי חדש
אי תאימות של הsfp (של בזק/נוקיה) למתאם החדש עלום השם שלך (אולי לא מהרשימה של בזק)... אחד לא מזהה את השני...
איפה קנית? אם תסתכל קצת אחורה בשרשור הנוכחי, למשל בפוסט הבא,...
viewtopic.php?p=3323875#p3323875
תוכל ללמוד שהרבה מהממירי 2.5 האלה פשוט לא עובדים עם מודולים מסוג Nokia G-010S-A (וגם תוכל ללמוד על הפתרונות שקיימים לבעיה הזו).
- Oreezy
- חבר שרק התחיל

- תגובות: 3
- הצטרף: פברואר 2024
- שם מלא: O.R
- מיקום: Israel
- נתן תודות: 0
- קיבל תודות: 0
I could really use your help. I know many people are having the same problem but I don't know where else to turn. Sorry that I'm speaking English, my hebrew isn't the best. I am trying to get my 2.5G Bezeq connection to work and I'm stuck at 1G.
My equipment
GPON ONT SFP G-010S-A
3FE46XXXAADA
10 GTEK 1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)
2.5Gbps 100M 2.5G-T-R-RM Rate Matching Mode RTL8221 Copper RJ45 SFP+Transceiver For Mikrotik Cisco 2.5G Ethernet Switch
Asus AX89X
I have verified with BEZEQ support the sfp module (Nokia G-010S-A) is properly registered on their network and they have verified it. I'm receiving 1G into the wan port and 2.5G from 10T Wan into my computer.
Any Help would be so appreciated this is so frustrating. If you can help me troubleshoot the issue I would be eternally grateful. Thank you so much in advance.
My equipment
GPON ONT SFP G-010S-A
3FE46XXXAADA
10 GTEK 1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)
2.5Gbps 100M 2.5G-T-R-RM Rate Matching Mode RTL8221 Copper RJ45 SFP+Transceiver For Mikrotik Cisco 2.5G Ethernet Switch
Asus AX89X
I have verified with BEZEQ support the sfp module (Nokia G-010S-A) is properly registered on their network and they have verified it. I'm receiving 1G into the wan port and 2.5G from 10T Wan into my computer.
Any Help would be so appreciated this is so frustrating. If you can help me troubleshoot the issue I would be eternally grateful. Thank you so much in advance.
29/02/2024 22:27Oreezy כתב: I could really use your help. I know many people are having the same problem but I don't know where else to turn. Sorry that I'm speaking English, my hebrew isn't the best. I am trying to get my 2.5G Bezeq connection to work and I'm stuck at 1G.
My equipment
GPON ONT SFP G-010S-A
3FE46XXXAADA
10 GTEK 1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)
2.5Gbps 100M 2.5G-T-R-RM Rate Matching Mode RTL8221 Copper RJ45 SFP+Transceiver For Mikrotik Cisco 2.5G Ethernet Switch
Asus AX89X
I have verified with BEZEQ support the sfp module (Nokia G-010S-A) is properly registered on their network and they have verified it. I'm receiving 1G into the wan port and 2.5G from 10T Wan into my computer.
Any Help would be so appreciated this is so frustrating. If you can help me troubleshoot the issue I would be eternally grateful. Thank you so much in advance....
English is fine, but in order for it to be properly aligned and readable, you need to use the appropriate mode in the editor (click on "eng").
It looks like you have the right media converter and combination of SFP modules that go into it and should enable you to achieve a 2.5G connection, but it isn't clear to me how you are trying to connect this to your router.
It looks like you have the right media converter and combination of SFP modules that go into it and should enable you to achieve a 2.5G connection, but it isn't clear to me how you are trying to connect this to your router.
29/02/2024 22:27Oreezy כתב: I could really use your help. I know many people are having the same problem but I don't know where else to turn. Sorry that I'm speaking English, my hebrew isn't the best. I am trying to get my 2.5G Bezeq connection to work and I'm stuck at 1G.
My equipment
GPON ONT SFP G-010S-A
3FE46XXXAADA
10 GTEK 1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)
2.5Gbps 100M 2.5G-T-R-RM Rate Matching Mode RTL8221 Copper RJ45 SFP+Transceiver For Mikrotik Cisco 2.5G Ethernet Switch
Asus AX89X
I have verified with BEZEQ support the sfp module (Nokia G-010S-A) is properly registered on their network and they have verified it. I'm receiving 1G into the wan port and 2.5G from 10T Wan into my computer.
Any Help would be so appreciated this is so frustrating. If you can help me troubleshoot the issue I would be eternally grateful. Thank you so much in advance....
Deciphering your wall of technical specs is not a enjoyable task.
Consider uploading some pictures of your setup as it would better serve those trying to help you.
Just so we're clear - you've connected a Cat 5e (emphasis on the e) or a Cat 6 cable from your GTEK converter to the 10Base-T WAN port on your router?
If so, what wired speed is your router reporting on that WAN port (check the web interface)?
It's unclear from your post what exactly is the problem you've encountered and how is it related to your computer, if at all.
Consider uploading some pictures of your setup as it would better serve those trying to help you.
Just so we're clear - you've connected a Cat 5e (emphasis on the e) or a Cat 6 cable from your GTEK converter to the 10Base-T WAN port on your router?
If so, what wired speed is your router reporting on that WAN port (check the web interface)?
It's unclear from your post what exactly is the problem you've encountered and how is it related to your computer, if at all.


