In addition, a new function "YPAO-Low Frequency Mode" is also installed. It is a function that adjusts only to 15.6Hz to 200Hz, which has a long wavelength and tends to remain as a standing wave, and can improve the sharpness and visibility of low frequencies.
The advantage of this mode is that you can make finer and more detailed adjustments by targeting only the low frequencies. The frequency attenuation is measured on different time axes, and the frequency with low attenuation is adjusted. Specifically, in other modes, 31.2Hz to 16kHz is adjusted in 1/3 octave intervals. On the other hand, in YPAO-Low Frequency Mode, you can finely adjust the target from 15.6Hz to 200Hz in 1/12 octave delimiters.
The advantage of this mode is that you can make finer and more detailed adjustments by targeting only the low frequencies. The frequency attenuation is measured on different time axes, and the frequency with low attenuation is adjusted. Specifically, in other modes, 31.2Hz to 16kHz is adjusted in 1/3 octave intervals. On the other hand, in YPAO-Low Frequency Mode, you can finely adjust the target from 15.6Hz to 200Hz in 1/12 octave delimiters.
גם הארכת אחריות ל-5 שנים (במקום 3 שהיו נהוגות עד עתה ותמיכה ב-AURO-3D למי שזה ממש חשוב לו.
