עדכוני קושחה ל HD X 900

[ziv_r]

נסה להתקין שוב את עדכון הקושחה.
אם לא מסתדר, תריץ את פרוצדורת ה Fail Safe Kernel, ניתן למצוא אותה באתר של HD X 900.

[lito]

נסה להתקין שוב את עדכון הקושחה.
אם לא מסתדר, תריץ את פרוצדורת ה Fail Safe Kernel, ניתן למצוא אותה באתר של HD X 900.

...

נסיתי לעדכן קושחה מחדש, אי אפשר כי אין כל תגובה. באתר של HDX אי אפשר למצוא את הפרוצדורה. יעזור לעשות מה שאתה המלצת או מה שעשו ב POPCORN? היום אני נוסע לחו"ל ל 20 יום והייתי רוצה לדעת שהמכשיר המקולל הזה פועל כאשר אני מגיע חזרה.


Firmware Recovering Steps
====================
1. Download Popcorn Hour firmware from http://www.popcornhour.com/download/fir ... pdate.html
2. Rename Popcorn Hour firmware bin to up5fw2TP.bin
3. Copy up5fw2TP.bin to ROOT folder of USB
4. Plug in USB and boot up the NMT
5. Wait for around 10~15 minutes for the recovering process to finish
6. If it doesn't reboot after 15 minutes, try unplug the power cable and power up the device manually
7. If it still didn't boot up, that means kernel already corrupted and need to send back to us for repair


חזור למעלה


katalanh
חבר פעיל מאוד




הצטרף בתאריך:
Jun 01, 2007
הודעות: 128

#157 נשלח: ו' 25/07/2008 21:07 כותרת הודעה:
מצאתי את הפתרון, זה לא ההתאוששות הקודמת


--------------------------------------------------------------------------------

באתר התמיכה של פופקורן יש את ההתאוששות מנסיון עדכון לאחר גרסה 612 .

הוא שונה ממה שזיו ציין, מה שזיו ציין מתאים להתאוששות מגרסאות מוקדמות יותר ל 612

לאחר גרסה זאת ההתאוששות היא כמפורט להלן


If you pass all the kernel programming during firmware update, you can try to use the below method to recover your firmware.

1. Please download: http://www.popcornhour.com/download/recovery_080612.zip
2. Unzip both *.bin onto the root of a USB thumbdrive and plug into NMT.
3. Connect Component or Composite output
4. Power up the unit.
5. Component or Composite video will display following colours depending on its recovery status:
RED - Required binaries on USB thumbdrive detected, starts recovery
WHITE DOTs - reprogramming
YELLOW - Recovery failed
WHITE - Recovery success
6. After successful recovery, power cycle will bring it up again to 01-17-080612-15-POP-402-000 firmware.

Applies to Products A-100

[ziv_r]

התהליך שהצגת כאן שייך ל A-100, לא ל HD X 900 ולכן לא יתאים.
תפתח קריאת שירות באתר של HD X 900, הם יעבירו לך את הפרוצדורה המדוייקת.

סתם כדרך אגב, יש תמונה דרך חיבור קומפוננט?

[lito]

לא ניסיתי, ה TV TRICK לא פעל. אבדוק.

[avishaya]

יצא עדכון חדש ל-HDX900

http://www.hdx1080.com/index.php?option ... Itemid=136

[lito]

צריך לשנות את השם של הקובץ?:

rename filename 00-17-081023-15-HDD-402.nmt to syb8634.nmt and copy into the ROOT directory. (if you want to install NMT apps only)

[ziv_r]

בדיוק כמו שרשום, רק אם ברצונך להתקין את אפליקציות ה NMT.

[lito]

בדיוק כמו שרשום, רק אם ברצונך להתקין את אפליקציות ה NMT.

...

את התרגום ידעתי, אבל זו פעם הראשונה שיש הערה כזו. קיצר, אני רוצה את כל העדכון כולל אפליקציה חדשה אם יש. אז בלשון העם:

להשאיר את השם המקורי וללחוץ פעמיים על ה EXPLORER ?

[ziv_r]

כאשר קובץ ה NMT לא מופיע עם השם syb8634.nmt, אזי יש צורך לשנות את שמו.
קיום ההערה מהווה הנחיה לכך וחוסר שאלות לאחר מכן כאשר מגלים כי ה NMT לא נמצא והותקן.

תשנה את השם כפי שכתוב ואז תמשיך עם ההתקנה.

[ziv_r]

עדכון קושחה חדש רואה אור.
[left]
Release Date: 6 March 2009
Firmware Version: 01-17-090116-15-HDD-402-000

Release Note :
1. Requires NMT apps 00-17-090115-15-POP-402
2. Browser / System
- Improvement on font engine character rendering (30% speed up)
- faster navigation on local drives
- Use numeric key to input item number to jump to the page where item is located
- Improved fileplayer speed
- Fixed HDMI display output blackout issue for auto EDID
- Discrete RC (Logitech) scancode fix
- up-date-d network share and webservices language packs.
- Removed EXT2 option for NMT installation
- Note: due to long term reliability issue with EXT2 on device that is frequently turned off abruptly
- Additional symbols can be input from "1" key
- HTTP download manager (only works with links with special "download" attributes.
- File player hide Recycle Bin folder
- Fixed 'TV MODE' + '3' key handling bug
- Fixed recovery kernel no red screen displayed
- Browser image caching fix, should fix some YAMJ crashes or no image issue.
- Fixed HDD spin-up during standby
- Fixed slow loading of HTML pages
3. Web Services
- New UI
- customizable icon feature with browse image utility (need NMT apps)
- bug fixes on customizable service icon with browse feature.
- Web Services page modification
- Fixed a "save/remove service" bug
- Now able to customise JPG/BMP icon
- Fixed slow IR response while playback Internet Radio
- Immediate response to STOP during Internet video streaming
- Fine-tune Web Service UI
4. Network
- Improved SMB server startup time
- Improved browsing time for SMB client
- Atheros USB WiFi stability fixes
- Fixed SMB client hostname resolution picked up wrong IP address from the IP list
- Fixed file copy failed from HDD to SMB/NFS with names containing whitespace
- Fixed UPnP AV server playall issue broken in previous release
- Fixed Samba server halts after device name change
- Torrent client is now by default Transmission (btpd removed)
**** IMPORTANT NOTE: Please ensure completion with previous downloads with BTPD, as new Transmission client cannot inherit previous downloads.
- Fixed torrent schedule page not working
- Fixed occasionally newly created SMB/NFS shares doesn't show up in media source list
- Atheros USB WiFi added support for TP-Link v2 stick
- Fixed persistent private IP when DHCP server unavailable (e.g. cross-cable connection etc)
5. Playback
- Bookmark/resume for single playback
- 10 bookmarks available now
- Press stop to bookmark the last video playback
- Press enter / play with focus on bookmarked clip to resume
- Press "0" to start from beginning of clip
- Auto framerate synchronisation
- Framerate sync function in ISO playback, only for 50,60Hz modes (PAL/NTSC)
- switch to NTSC(60Hz) when selec-ted mode not applicable.(previously, it will follow TV mode selec-ted)
- Use 59.94 for NTSC when matching content detected.
- Fixed incorrect data shown on infobar.
- Fixed after ISO playback, screen goes blank when framerate sync kicks in
- Improved info display
- Disable incorrect video MPEG1/2 VBR display.
- Fixed incorrect framerate info for video playback (*.mov, *.mp4).
- Fixed video bitrate calculation error (less 1 packet every second)
- Modified infobar UI (height, spacing and text displayed)
- Fixed info bar losing text after paused
- Improved accuracy of mpeg1/2 bitrate information
- Photo app
- Fixed JPEG (PNG / TIFF transcode) from myiHome server cannot be displayed
- Fade-In Fade-out effect added for photo transition
- Enable large jpeg rotation. (downscale before rotate)
- Fixed faded color for jpeg at 360-deg rotation
- TV Type setting for DVD playback
- the TV type setting is now working for DVD video playback (4:3 and 16:9 only, 16:10 will treat as 16:9)
- DVD Menu
- new popup menu if MENU key on PCH remote controller is pressed
- user can selec-t to jump to ROOT, TITLE, CHAPTER.... etc from the menu
- Modified progressive zoom and pan in ISO/IFO playback
- Removed up/down keys as prev/next track/td>
- VCD *.DAT playback fixed using soft demux
- Fixed "repeat" keypress in myiHome when playback audio caused picture playback to halt
- Improved handling of MKV H.264 profile and vlevel.
- Fixed cannot stream MPEG from UPnP AV server, liveTV
- Fixed .pls file unable to start when playback locally (HDD/SMB/NFS)
- *.m3u playlist supported.
- Fixed TS with stream6 as teletext playback cause out of memoryFixed MKV H264 L4.1 pixelated video issue
6. Subtitle
- Fixed Hebrew SRT subtitle containing invalid character
- Fixed subtitle parsing with BOM (UTF8 support only)
- Fixed wrong character rendered in Thai subtitle
- Changed default subtitle font size to 28 and Y offset to 10
- Exception handling in SSA subtitle parsing
- Slight adjustment of subtitle position

NMT Apps Version: 00-17-090115-15-HDD-402
Release Note :
1.Minimum firmware version to use this NMT App is 50-17-090116-15-HDD-402-000
2. Improved on samba client browsing time and server boot up time
3. Fixed occasional slow samba response
4. Upgraded to nzbget 0.51
5. Upgraded to nzbgetweb 1.2 (Categories can be modifed in /mnt/syb8634/nzbgetweb/setting.php5)
6. Various Casgle fixes
7. Fixed FTP password saving
8. Improved Setup Page loading time
9. Remove btpd, using Transmission as default BT client
10. Fixed sometimes unable to access casgle web ui
11. Fixed HDD spin-up during standby

Note : Unzip into the root of your USB thumbdrive. Browse to usbupdat-e.html to updat-e.
Please DO NOT power off the unit during firmware updat-e, as it will render your unit inoperational.
[/left]
http://www.hdx1080.com/index.php?option ... Itemid=136

[ziv_r]

קושחה חדשה לדגם ה 900 רואה אור.
[left]
Release Date : 12 APRIL 2010
Firmware Version : 01-17-100317-15-HDD-403-000

Release Note :
1. Requires NMT apps 00-17-091216-15-HDD-403
2. Fixed file copy over 4GB from FAT filesystem will hang
3. Added show % during for firmware update download
4. New Transmission BT client 1.75 (need new NMT app installed)
5. Added trickmode (pause, FF, volume) for RTSP, where applicable
6. Add special characters handling for WiFi SSID
7. Added Shoutcast Internet radio
8. Fixed NFS cannot read some folders when root level contain many folders
9. Fixed colorspace for SD/HD file playback
10. Fixed IDX/SUB data decoding error causing garbled rendering with certain files
11. Fixed: IDX/SUB with multiple languages

Note : Unzip into the root of your USB thumbdrive. Browse to usbupdate.html to updat
Please DO NOT power off the unit during firmware update, as it will render your unit inoperational.
[/left]
http://www.hdx1080.com/download/cat_vie ... 0-firmware