oshapir כתב:לאחר לילה ארוך ללא שינה, ובעזרתו האדיבה והמלומדת של mpogr (מיכאל) אני שמח להודיע כי מדריך מפורט להתקנת כרטיס DVB-S ב-SAGETV כולל חיבור פשוט! ללוח המשדרים (מיכאל, בגרסה 6 לא צריך לוח משדרים נוסף רק לערוצים 2 ו-10 - הגיע העת לשדרג...) - יעלה לאתר בעוד מספר ימים...
אורן....
- ז"א רואים את ערוץ 2 ו-10. 
קוד: בחירת הכל
[General]
XMLEncoding=UTF-8 ; This is the XML encoding used for the output. Currently only UTF-8,
; ISO-8859-8 (Hebrew), ISO-8859-6 (Arabic) and ISO-8859-5 (Cyrillic)
; are recognized.
; The default is UTF-8 and is usually recommended.
DefaultLanguage=heb ; Default language for programs and descriptions.
; Supported values are "heb", "rus", "eng" and "ara".
; The default is "heb".
;ForceRussian=1414,1415,1416,1312,1408,1211,105,1013,812,208 ; Force Russian language for the listed services,
; regardless of the default langauage. "ForceEnglish", "ForceHebrew"
; and "ForceArabic" are also supported.
; Please, note, that is you have any of these you must use UTF-8
; encoding, otherwise your output will be seriously messed up.
; The default for all these is an empty list.
GMTOffset=0 ; GMT offset in the XMLTV. If your computer is always at GMT+2,
; you need to have 0 here. If it's GMT+3 during DST, you need
; to have 1 here during DST and 0 during the winter time.
; The default is 0.
CategoryLanguage=heb ; Language for categories. Only "heb" and "eng" are supported right now.
; The default is "heb"
[Tuner]
InitialTimeout=1 ; First time timeout value (in minutes).Note: this is started only
; after the first transponder change is performed.
; The default is 1.
IterativeTimeout=1 ; Following timeout value (after the first ones).
; The default is 1.
FirstTransponderSwitchTime=1 ; Time (in minutes) before the first transponder switch.
; The default is 1.
NextTransponderSwitchTime=40 ; Time interval to the following transponder changes.
; The default is 10.
OriginalTransponder=10806000 ; Initial transponder frequency.
; The default is 10806000.
SecondaryTransponder=10806000 ; Additional transponder frequency. The transponders then flip.
; If the two frequencies are equal, no tuning command is sent
; to the tuner.
; The default is 10806000.
TunerOrdinal=1 ; Ordinal number of the tuner, if you have more than one
; (I have a Starbox and a DVB-T tuner, and it happens my Starbox
; is the second tuner).
; The default is 1.
