עדכוני STREAMERS
-
oferlaor
- מנהל

- תגובות: 78795
- הצטרף: נובמבר 2004
- שם מלא: עפר לאור
- מיקום: מודיעין, ישראל
- נתן תודות: 785 פעמים
- קיבל תודות: 5381 פעמים
- ziv_r
- עורך ראשי HTmag

- תגובות: 46347
- הצטרף: ינואר 2005
- נתן תודות: 1966 פעמים
- קיבל תודות: 5072 פעמים
TViX_NetShare_1.06
לא ראיתי איזשהוא שינויי מהותי
ftp://ftp.dvico.com/Products/TViX/TViX_ ... e_1.06.exe
ftp://ftp.dvico.com/Products/TViX/TViX_ ... e_1.06.exe
- ziv_r
- עורך ראשי HTmag

- תגובות: 46347
- הצטרף: ינואר 2005
- נתן תודות: 1966 פעמים
- קיבל תודות: 5072 פעמים
גרסת FIRMWARE חדשה, 1.85 - נראית זהה ל 1.83
http://www.tvix.co.kr/Eng/support/M5000Firmware.aspx
oferlaor,
חשבתי שאחרי שאני עונה לך לגבי מספר היציאות מאחורי הראוטר אתה תגיד לי משהו כמו "נו בטח, אתה צריך רק...." והבעיה תפתר לי
http://www.tvix.co.kr/Eng/support/M5000Firmware.aspx
oferlaor,
חשבתי שאחרי שאני עונה לך לגבי מספר היציאות מאחורי הראוטר אתה תגיד לי משהו כמו "נו בטח, אתה צריך רק...." והבעיה תפתר לי
- ziv_r
- עורך ראשי HTmag

- תגובות: 46347
- הצטרף: ינואר 2005
- נתן תודות: 1966 פעמים
- קיבל תודות: 5072 פעמים
Re: TViX_NetShare_1.06
sagsag כתב:לא ראיתי איזשהוא שינויי מהותי
ftp://ftp.dvico.com/Products/TViX/TViX_ ... e_1.06.exe...
changelog
http://www.tvix.co.kr/Eng/support/M5000 ... =RD&id=186
-
oferlaor
- מנהל

- תגובות: 78795
- הצטרף: נובמבר 2004
- שם מלא: עפר לאור
- מיקום: מודיעין, ישראל
- נתן תודות: 785 פעמים
- קיבל תודות: 5381 פעמים
זיו,
אתה צריך לקרוא בספר של הראוטר שלך. מרבית הראוטרים כוללים SWITCH.
הייתי בודק ליתר ביטחון לגבי חוט מוצלב ישיר.
אתה צריך לקרוא בספר של הראוטר שלך. מרבית הראוטרים כוללים SWITCH.
הייתי בודק ליתר ביטחון לגבי חוט מוצלב ישיר.
- ziv_r
- עורך ראשי HTmag

- תגובות: 46347
- הצטרף: ינואר 2005
- נתן תודות: 1966 פעמים
- קיבל תודות: 5072 פעמים
- ziv_r
- עורך ראשי HTmag

- תגובות: 46347
- הצטרף: ינואר 2005
- נתן תודות: 1966 פעמים
- קיבל תודות: 5072 פעמים
- unsound_methods
- חבר פעיל במיוחד

- תגובות: 563
- הצטרף: אפריל 2006
- מיקום: מרכז
- נתן תודות: 0
- קיבל תודות: 0
ziv_r מה נשמע?
יש לי זכרון מעורפל... קצת לפני המלחמה... קנית tivx... בעצם שניים, אחד לחבר שלך לא?
ובכן מאז, בעודי מרפרף על שרשורים כאלה ואחרים, אני נתקל לסרוגין בכל מיני שרשורים שלך: כתוביות, עדכונים, performance, ראוטרים...
ועכשיו בכנות, האם זה שווה את ההתעסקות?
יש לי זכרון מעורפל... קצת לפני המלחמה... קנית tivx... בעצם שניים, אחד לחבר שלך לא?
ובכן מאז, בעודי מרפרף על שרשורים כאלה ואחרים, אני נתקל לסרוגין בכל מיני שרשורים שלך: כתוביות, עדכונים, performance, ראוטרים...
ועכשיו בכנות, האם זה שווה את ההתעסקות?
- ziv_r
- עורך ראשי HTmag

- תגובות: 46347
- הצטרף: ינואר 2005
- נתן תודות: 1966 פעמים
- קיבל תודות: 5072 פעמים
כאשר האלטרנטיבה היא HTPC, ה TViX כרגע עבורי מוביל ביתרון קטן והולך.
-
oferlaor
- מנהל

- תגובות: 78795
- הצטרף: נובמבר 2004
- שם מלא: עפר לאור
- מיקום: מודיעין, ישראל
- נתן תודות: 785 פעמים
- קיבל תודות: 5381 פעמים
עדכון נוסף שוחרר אתמול ל-TVIX: גירסא 1.8.5
[left]
1. Now, M5000 work as a FTP server, so you can download and upload files through FTP clients. The username is tvixftp, and you can see the password on setup screen.
a. The id and password is case sensitive.
b. M5000 allows only one connection at the same time.
c. You will see the list of folders when you connect. You can connect to internal or external USB HDD attached to TViX. The name of local hard partitions starts with disk, disk1 is the first partition disk2 is the second partition. The names of first USB HDD are usb1(first partition) to usb4(fourth partition), and the second USB HDD are from USB5 to USB8. You will see these even though you do have only one partition in your HDD.
d. You cannot copy files or create a directory on the root. (שינוי מגירסא קודמת?)
e. If you copy or download files, you can not delete the folder that contains these files until you finish the transfer.
We do not recommend using Internet explorer, because it has some limitation like can not handle over 4G files and it is slower and unstable than other FTP clients. To get better performance, we recommend using dedicated FTP client program. אני משתמש ב-CUTEFTP.
f. If you have problem of connect to M5000 FTP server, you need to restart the unit.
g. While you are copying a file, you can not see the file. You will see the file after the transfer is over.
h. The average speed is vary by network environment, ftp client and the client PC, but we found the range is around 15Mbps to 35Mbps, and this is when M5000 is not playing any files. If you play files while transfer, the transfer rate will decrease. In other words, you can play files while you are copying files if you sacrifice some transfer speed. כלומר, לא מדובר בקצב גבוה במיוחד.
1.6MBps - 4MBps
2. M5000 supports up to four different network share.
3. Screen saver added
a. If you want to change the drifting image, please put image file to the first partition and named it tvix_ss.jpg. Also, please make sure the maximum size of image is 160 * 160.
b. The screen saver will start after two minute if there is no input in file browser mode.
4. Support automatic TV type(vertical refresh rate) change according to the source frame rate
a. If you set NTSC/PAL automatic change, M5000 will check the frame rate and change the TV out vertical refresh frequency. Currently, M5000 will check AVI, WMV, MP4 and TS/TP files.
b. 29.97/59.94 F/S will be changed to NTSC and 25/50 F/S will be changed to PAL
c. You can set this on only when you have multi-standard TV.
5. M5000 will show EXIF information of jpeg files. You can see this by pressing info key.
Add dvd play resume
a. It will save the last position of DVD title. However, it only save one DVD title, so if you play other files, the bookmark will be replaced.
b. M5000 applies NLS option to mount DVD discs, so you can see non ASCII characters without problems. (Only supported language will be shown correctly.)
c. Autorun will work with USB or Network shares.
d. If you have a local HDD, M5000 will play files in the autorun folder of the first partition. (Will not check other USB or network share).
e. If you connect USB disks only, then M5000 will play files in the autorun folder of the first USB partition.
f. If you only connect network, M5000 will play files in the autorun folder of the first network share.
6. M5000 now supports .txt subtitle (MicroDVD and TmPlayer format)
7. Improved support of IDX/SUB files. But, it will not support larger than 720 * 576.
8. Changed the location of text subtitles to the bottom. In case of one line, it will be shown in the last line not in the second to last line.
9. If you press info key while you are browsing files, you can see the network information.
10. Better support of trick play and time search of tp , trp, ts files.
11. Removed false bitrates information of WMV files.
12. Improved support of TP/TS files that have DTS audio.
13. Change font size and outline width for better subtitle readability.
14. M5000 will find the autojpg folder on the first partition of each type of disk(local HDD, USB1, USB2 or Network share) when you play audio files. (Previously, M5000 only find autojpg folder when you play audio files on local HDD.)
15. Improved support of jpeg files. In case of progress jpg files, it will play less than 1024 * 768 and less than Adobe Compression Quality 6.
16. We changed the timeout period of NFS connection fail from 3sec to 5sec.
17. The IP address will be assigned when the unit is booted. If the unit is not hooked up, you can reset the IP settings in the setup menu by reset IP settings.
18. Other minor bug fix.[/left]
[left]
1. Now, M5000 work as a FTP server, so you can download and upload files through FTP clients. The username is tvixftp, and you can see the password on setup screen.
a. The id and password is case sensitive.
b. M5000 allows only one connection at the same time.
c. You will see the list of folders when you connect. You can connect to internal or external USB HDD attached to TViX. The name of local hard partitions starts with disk, disk1 is the first partition disk2 is the second partition. The names of first USB HDD are usb1(first partition) to usb4(fourth partition), and the second USB HDD are from USB5 to USB8. You will see these even though you do have only one partition in your HDD.
d. You cannot copy files or create a directory on the root. (שינוי מגירסא קודמת?)
e. If you copy or download files, you can not delete the folder that contains these files until you finish the transfer.
We do not recommend using Internet explorer, because it has some limitation like can not handle over 4G files and it is slower and unstable than other FTP clients. To get better performance, we recommend using dedicated FTP client program. אני משתמש ב-CUTEFTP.
f. If you have problem of connect to M5000 FTP server, you need to restart the unit.
g. While you are copying a file, you can not see the file. You will see the file after the transfer is over.
h. The average speed is vary by network environment, ftp client and the client PC, but we found the range is around 15Mbps to 35Mbps, and this is when M5000 is not playing any files. If you play files while transfer, the transfer rate will decrease. In other words, you can play files while you are copying files if you sacrifice some transfer speed. כלומר, לא מדובר בקצב גבוה במיוחד.
1.6MBps - 4MBps
2. M5000 supports up to four different network share.
3. Screen saver added
a. If you want to change the drifting image, please put image file to the first partition and named it tvix_ss.jpg. Also, please make sure the maximum size of image is 160 * 160.
b. The screen saver will start after two minute if there is no input in file browser mode.
4. Support automatic TV type(vertical refresh rate) change according to the source frame rate
a. If you set NTSC/PAL automatic change, M5000 will check the frame rate and change the TV out vertical refresh frequency. Currently, M5000 will check AVI, WMV, MP4 and TS/TP files.
b. 29.97/59.94 F/S will be changed to NTSC and 25/50 F/S will be changed to PAL
c. You can set this on only when you have multi-standard TV.
5. M5000 will show EXIF information of jpeg files. You can see this by pressing info key.
Add dvd play resume
a. It will save the last position of DVD title. However, it only save one DVD title, so if you play other files, the bookmark will be replaced.
b. M5000 applies NLS option to mount DVD discs, so you can see non ASCII characters without problems. (Only supported language will be shown correctly.)
c. Autorun will work with USB or Network shares.
d. If you have a local HDD, M5000 will play files in the autorun folder of the first partition. (Will not check other USB or network share).
e. If you connect USB disks only, then M5000 will play files in the autorun folder of the first USB partition.
f. If you only connect network, M5000 will play files in the autorun folder of the first network share.
6. M5000 now supports .txt subtitle (MicroDVD and TmPlayer format)
7. Improved support of IDX/SUB files. But, it will not support larger than 720 * 576.
8. Changed the location of text subtitles to the bottom. In case of one line, it will be shown in the last line not in the second to last line.
9. If you press info key while you are browsing files, you can see the network information.
10. Better support of trick play and time search of tp , trp, ts files.
11. Removed false bitrates information of WMV files.
12. Improved support of TP/TS files that have DTS audio.
13. Change font size and outline width for better subtitle readability.
14. M5000 will find the autojpg folder on the first partition of each type of disk(local HDD, USB1, USB2 or Network share) when you play audio files. (Previously, M5000 only find autojpg folder when you play audio files on local HDD.)
15. Improved support of jpeg files. In case of progress jpg files, it will play less than 1024 * 768 and less than Adobe Compression Quality 6.
16. We changed the timeout period of NFS connection fail from 3sec to 5sec.
17. The IP address will be assigned when the unit is booted. If the unit is not hooked up, you can reset the IP settings in the setup menu by reset IP settings.
18. Other minor bug fix.[/left]
- udif
-
- חבר ותיק

- תגובות: 2079
- הצטרף: אוקטובר 2005
- מיקום: תל אביב
- נתן תודות: 16 פעמים
- קיבל תודות: 78 פעמים
למה אתה חושב שאין לו יכולות כאלה?ziv_r כתב:אין לראוטר שלי יכולות SWITCHING:
http://www.edimax.com.tw/download/manua ... 14Wg_M.pdf...
לרוב הראוטרים האלה בנויים מיחידת ראוטר עם 3 כניסות:
1. LAN
2. WAN
3. Wifi
כאשר כניסת ה- LAN מחוברת לרכיב switch של 5 פורטים. מכיון שפורט אחד "מבוזבז" על החיבור הפנימי, נותרים 4 פורטים לחיבור חיצוני. מכיון שהרכיבים די סטנדרטיים וזולים (כמה עולה היום switch ל-5 פורטים? 100 ש"ח?), זה מסביר למה בכל הראוטרים יש 4 פורטים ל-LAN ואילו בכל ה-switch שנמכרים בנפרד יש 5 פורטים.
ה-switch שלך באמצע מוסיף latency לחיבור. אתה יכול בשלב ראשון "לשחק" עם פרמטר שנקרא MTU שאולי יעזור:
http://www.winguides.com/registry/display.php/280
בשלב השני יש כל מיני תוכנות שעושות אופטימיזציה לחיבורי ה- TCP/IP שלך בווינדוס.
אזהרה: אופטימיזיצה של חיבור ה- LAN תהיה שונה מאופטימיזציה לטובת חיבור לאינטרנט, ולכן שינוי לכוון אחד עלול לפגוע בכוון השני ולהיפך.
לא ניסיתי בעצמי אף אחת מהתוכנות למטה, כך שנסה אותן בזהירות:
SG TCP Optimizer
http://www.speedguide.net/downloads.php
iSpeed
http://www.hms.com/ispeed.asp
- ziv_r
- עורך ראשי HTmag

- תגובות: 46347
- הצטרף: ינואר 2005
- נתן תודות: 1966 פעמים
- קיבל תודות: 5072 פעמים
udif,
לראוטר שלי 5 כניסות:
1. WAN עבור המודם.
2. מחשב.
3. נגן טיויקס.
4. פנוי.
5. פנוי.
כלומר כל התקשורת שצריך הראוטר להעביר היא בין ב 2 ל 3.
בלי לשחק עם שום הגדרה בראוטר, הוא צריך לתת עדיפות שווה לכל 4 הכניסות: 2..5
אז מה יעזור אם אני אתן עדיפות לכניסות 2\3 אם גם ככה שאר הכניסות לא בשימוש?
לראוטר שלי 5 כניסות:
1. WAN עבור המודם.
2. מחשב.
3. נגן טיויקס.
4. פנוי.
5. פנוי.
כלומר כל התקשורת שצריך הראוטר להעביר היא בין ב 2 ל 3.
בלי לשחק עם שום הגדרה בראוטר, הוא צריך לתת עדיפות שווה לכל 4 הכניסות: 2..5
אז מה יעזור אם אני אתן עדיפות לכניסות 2\3 אם גם ככה שאר הכניסות לא בשימוש?
- udif
-
- חבר ותיק

- תגובות: 2079
- הצטרף: אוקטובר 2005
- מיקום: תל אביב
- נתן תודות: 16 פעמים
- קיבל תודות: 78 פעמים
כמו שאמרתי, כניסת ה- WAN נכנסת לראוטר, בעות שכניסות ה- LAN (2-5) מותגות בנפרד ומחוברות בפורט חמישי (פנימי) לראוטר. מכיון שכך, התעבורה בין 2 ו-3 לא נוגעת כלל לראוטר. מה שמאט אותה זה מנגנון ה-store & forward של ה-switch. משמעות המנגנון היא שה-switch חייב לקבל את כל ה-packet (או אם לדייק, את ה-frame) ורק לאחר שהוא התקבל בשלמותו ניתן לשדר אותו החוצה. רק המנגנון הזה מכפיל במקרה שלך את ה-latency, וזה לב הבעיה.ziv_r כתב:udif,
לראוטר שלי 5 כניסות:
1. WAN עבור המודם.
2. מחשב.
3. נגן טיויקס.
4. פנוי.
5. פנוי.
כלומר כל התקשורת שצריך הראוטר להעביר היא בין ב 2 ל 3.
בלי לשחק עם שום הגדרה בראוטר, הוא צריך לתת עדיפות שווה לכל 4 הכניסות: 2..5
אז מה יעזור אם אני אתן עדיפות לכניסות 2\3 אם גם ככה שאר הכניסות לא בשימוש?...
אף אחד לא דיבר (בטח לא אני) על בעייה של עדיפות בין הכניסות.
הפרמטרים שאני דיברתי עליהם מתייחסים לדברים כמו גודל הפקט המקסימלי (MTU) וגודל החלון בשידורי ה-TCP.
אני יכול להכנס להרצאה מלאה על נושאים אלה, ואתה מוזמן לעשות "דוקטורט" בנושא ולדון אם יש סיבה שיהיה שינוי או לא. בתור התחלה:
http://en.wikipedia.org/wiki/Transmissi ... l_Protocol
http://en.wikipedia.org/wiki/TCP_Tuning
http://en.wikipedia.org/wiki/Network_co ... _avoidance
ומצד שני, אתה פשוט יכול לנסות את התוכנות שהצעתי ולראות אם יש שיפור.
הבחירה בידך.
- ziv_r
- עורך ראשי HTmag

- תגובות: 46347
- הצטרף: ינואר 2005
- נתן תודות: 1966 פעמים
- קיבל תודות: 5072 פעמים
עקב המהירויות הנמוכות שניתן להגיע, מישהו באמת משתמש ביכולות ה FTP של ה TVIX להעברת קבצים גדולים?
חשבתי על כונן NAS בתור פתרון.
למישהו יש נסיון עם חיבור כונן כזה לנגן וניגון קבצים בעלי bitrate גבוה מ 25Mbps דרך ה NAS?
חשבתי על כונן NAS בתור פתרון.
למישהו יש נסיון עם חיבור כונן כזה לנגן וניגון קבצים בעלי bitrate גבוה מ 25Mbps דרך ה NAS?
-
oferlaor
- מנהל

- תגובות: 78795
- הצטרף: נובמבר 2004
- שם מלא: עפר לאור
- מיקום: מודיעין, ישראל
- נתן תודות: 785 פעמים
- קיבל תודות: 5381 פעמים
בהחלט.
יש לי דיסק 250G. דברים שאני מתכנן לצפות בהם יותר מפעם אחת או שהם חשובים - אני מעביר אותם בלילה מהמחשב למכשיר.
יש לי דיסק 250G. דברים שאני מתכנן לצפות בהם יותר מפעם אחת או שהם חשובים - אני מעביר אותם בלילה מהמחשב למכשיר.
- ziv_r
- עורך ראשי HTmag

- תגובות: 46347
- הצטרף: ינואר 2005
- נתן תודות: 1966 פעמים
- קיבל תודות: 5072 פעמים
אין לך במקרה כונן NAS מחובר ל TVIX?
מהתגובות ב AVSFUROM קשה להבין אם זה עובד כשורה או לא.
מהתגובות ב AVSFUROM קשה להבין אם זה עובד כשורה או לא.



