קוד: בחירת הכל

Boot your client from a USB thumb drive
Any recent computer today has USB ports, and most can boot from them. The Mythbuntu Control
Centre can prepare your thumb drive for you. Please make sure there is no valuable data on that drive
as data loss might occur!
All you need is a thumb drive where the first partition is formatted as fat32/vfat. As you can see
in figure 13.2, the settings for preparing flash drives are located in the Client Bootable Flash
Drive section. Before anything can be done in this section, please select your image in the Client
Maintenance section above.
Now you need to choose your flash drive. In the empty area next to that drop-down menu, the name
of your flash drive will be displayed. Make sure you select the correct one to avoid data loss. Next,
select the network interface which is connected to the network where your clients reside. This will
often be ”eth0”. If your server is not running all the time, you can also enable Wake on Lan there.
The initramfs will attempt to wake up the server before mounting the root file system.
Now select Write Drive and click Apply.