Thank you so much for your replies, I really really appreciate it.
I am connecting the media converter (GTek) to my Asus AX89X to its 2.5G wan port via cat 5E rj45. From there, I am connecting from the Asus router 10Base-T Wan to my computer via cat 5E rj45. In the admon panel of my Asus router it says speed into wan (from GTek) is 1G and the speed from 10Base-T Wan to my comp is 2.5G. My link speed in Network setting in Windows also states 2500 mbs link speed.
It’s like something is preventing the switch from my nokia sfp to 2.5G. Just to clarify I purchased the G-010S-A from Tamlil and not from Bezeq a few years ago. Maybe it’s an older firmware version?
I am connecting the media converter (GTek) to my Asus AX89X to its 2.5G wan port via cat 5E rj45.
...
What 2.5G wan port? According to the specs of this router, https://www.asus.com/networking-iot-ser ... /techspec/
it has a 1G wan port, and the only two ports on it that are capable of speeds above 1G are the 10GBaseT WAN/LAN port and the SFP+ port. Hence, In order to establish a 2.5G connection to your computer through this router, you will need to use one of these two ports as a wan port and the other to connect to your computer. If you don't have a network card with an SFP+ port, you will probably need an appropriate SFP+ module, such as the one in the following link, https://mikrotik.com/product/s_rj10
in order to do so.
Itfan!!! Thank you so much for providing me my "Eureka" moment. I completely forgot that the regular wan on the router is only 1G. I just moved the cable from that wan to the 10GBase-T and I actually found a SFP + to rj45 module in drawer that I was going to use for a different setup and put that into the SFP+ wan port of the Asus, then changed in admin panel to primary wan 10GBase-T and it works! Thank you so so much. I can't believe I didn't realize that.
You and Rafi_d are really such a great help to this community, I know there are so many others who help too and I just wanted to say thank you.
itfan כתב: ↑
אמור "לעבוד" אבל לא בטוח שהנתב יוכל "לסחוב" את מלוא המהירות של 2.5G בחיבור דרך חייגן PPPoE (שמהווה סוג חיבור "מאתגר" להרבה נתבים). צריך שמישהו יבדוק את הנתב הספציפי הזה וידווח על הביצועים שלו בסוג החיבור הזה. אם אתה לא מוצא דיווח של מישהו אחר, אתה יכול להתנדב להיות הנסיין שיעשה את זה.
...
עדכון: טוב אז אחרי שחודשיים לא היה במלאי את הנתב ועכשיו הוא חזר למלאי אז ככה... הסטאפ מוכן רק שבמקום Nokia G-010S-Q קניתי את G-010S-A כי לא היה שום דבר אחר בנתב לא התעסקתי יותר מדי בהגדרות ואני מצליח לקבל 1600-1800Mbps.
השאלה האם יש משו שאני צריך/אפשר להגדיר בנתב Asus Rt-ax88u pro כדי לקבל יותר מהירות או שזאת חזירות ואני צריך להסתפק במה שיש?
צריך לזכור שהמהירות שבזק משווקים בתור 2.5G היא בפועל סביב 2.2G (בגלל מה שהם קוראים "תקורות פרוטוקול") ושגם זה רוחב פס שמשותף לכל הלקוחות שמחוברים על אותו ענף GPON (כלומר, כמה עשרות לקוחות). לקוח בודד אף פעם לא יקבל את מלוא רוחב הפס הזה. אפשר להתקרב אליו, אבל רק בשעות שבהן אין עומס מהשכנים. כדאי גם לנסות שרתי speedtest שונים (לרוב יש כאלה שעובדים טוב יותר מאחרים) וחשוב לבדוק באמצעות אפליקציה ולא באמצעות דפדפן (בהרבה מקרים, בדיקה של מהירות גבוהה באמצעות דפדפן בודקת את ביצועי המחשב שמריץ את הדפדפן ולא את ביצועי הרשת).
אני מצליח לקבל 2.2Gbps דרך אפליקציה במחשב, ורק דרך שרתי הבדיקה הבאים (לפי סדר)
1. פרטנר
2. Hot
3. Cellcom
4. Hot mobile
התוצאות דרך שרתים אלו די עקביות. לגבי השאר - בדרך כלל לא מגיע למקסימום, וטווח התוצאות די רחב.
מה שמוזר ששרת הבדיקה של בזק לא נותן את התוצאה המקסימלית ברוב המקרים, מה שמצביע על כך שתצורת שרת הבדיקה כנראה לא אופטימלית